When winter arrives, it often encounters fog or dark weather. At this time, the visual conditions are not good, and the owners will complain that their lights are not far enough and not bright enough. So how to directly improve the lighting effect of the original bulb through reasonable and simple debugging without changing the lamp? Here is the experience of sharing.
Tools and raw materials: talcum powder or talcum powder
Method and steps
On daylight days, let the lampshade part enjoy the sun in the sun, so that the water vapor can be evaporated and the talcum powder or talcum powder can be evenly applied around the seal ring and the bulb rubber envelope to ensure the life and elasticity of the rubber seal kit and increase the seal. effect. If dust is present in the lampshade, insert the vacuum cleaner as much as possible after the bulb is removed. After draining the dust, follow the above maintenance seal kit.
Look for a flat field with a vertical light-colored wall. First stop the car head as close as possible to the wall, then reversing the line 7 to 9 meters. Measure the geometric center point of the lamp to the ground level. Measure the distance from the center of the bulb to the geometric center of the front of the car.
When changing the bulb, you can see if the worker's hand is holding the metal part of the bulb instead of the glass part. And the new light bulb is used to carefully wipe the upper mark and fingerprint with a paper towel.
Precautions
If dust is present in the lampshade, insert the vacuum cleaner as much as possible after the bulb is removed. After draining the dust, follow the above maintenance seal kit.
Weihai Jocund Home Textile Co., Ltd , https://www.jocundhome.com